Vertical Rear-Vent Installation

,

 

Follow the illustration to the right. Obtain measurements from the back of your stove to the wall thimble, then attach a tee to the wall thimble.

Measure from the tee through the roof over-hang to the vertical vent cap. Make sure to add a tee support bracket every 4 feet.

You can now determine how much pipe length you will need for your installation.

Choose from two different pipe diameters:

 

 

 

 

 

Disclaimer

The instructions on this page reflect professional suggestions on how to install this system or product. Installation must be done by a qualified professional. K's Chimney / Fresh Air, Inc. is not responsible nor will be held liable for damage or loss to property, building, or body due to improper installation based on instructions or of products purchased on KsChimney.com or related entities.

A MAJOR CAUSE OF CHIMNEY RELATED FIRES IS FAILURE TO MAINTAIN REQUIRED CLEARANCES (AIR SPACES) TO COMBUSTIBLE MATERIALS. IT IS OF THE UTMOST IMPORTANCE THAT THIS CHIMNEY BE INSTALLED ONLY IN ACCORDANCE WITH THESE INSTRUCTIONS.

Read through all manufacturer installation instructions before beginning your installation. Failure to install the chimney as described in these instructions will void the manufacturer’s warranty and may have an effect on your homeowner insurance and UL listing status.